Skip to content
NAV 008

Radio navigation, departure procedures

Obstacle clearance

The design of every instrument procedure, departures included, rests on three points.

All engines operatingThe procedure assumes that all the aircraft's engines are working.
Obstacle clearance firstObstacle clearance is the primary safety consideration.
Standard temperatureThe calculations are based on the standard temperature.

MOC, minimum obstacle clearance: the least height the procedure keeps above the highest obstacle in each segment.

The standard atmosphere and its temperatures: MET 002.

The three departures

Three kinds of departure

An IFR flight leaves the aerodrome by one of three kinds of departure procedure.

OmnidirectionalSIDStandard instrument departureVisual departure
How it is flownStraight ahead to a published height, then in any direction, as ATC clearsAlong a published route, from the runway to a significant pointBy visual reference to the terrain, for part or all of the departure
Who keeps it clear of obstaclesThe procedureThe procedure: it is designed around the obstaclesThe pilot

Omnidirectional departure

One rule for the start, then any direction.

Omnidirectional departure: used where there is no track guidance. The aircraft climbs straight ahead to a published height, then may turn in any direction, as ATC clears.

The direction comes with the ATC clearance. A height is measured from the aerodrome, an altitude from mean sea level: ATM 005.

The SID

SID, standard instrument departure: a published route out of the aerodrome.

PublishedA flight procedure for IFR flights to follow immediately after take-off.
Around the obstaclesDesigned around the obstacles near the aerodrome.
Runway to significant pointIt links the runway to a significant point.

Where the SID ends, the en-route phase begins: NAV 009. The SID among the ATS routes, a designated IFR departure route, with the STAR, its arrival twin: LAW 004. The waypoint symbols: NAV 002.

Visual departure

Part or all of the instrument departure, flown by sight of the ground.

Visual departureA departure by an IFR flight when part or all of an instrument departure procedure, such as a SID, is not completed. The departure is flown by visual reference to the terrain. The flight stays IFR.
Obstacle clearanceThe pilot is responsible for keeping clear of obstacles.

A visual departure is not VFR. An IFR flight on a visual departure is still an IFR flight.

Its twin at the other end of the flight, the visual approach: NAV 004 and NAV 010.

Learn by heart

Learn the departures

Every assumption, kind and rule on this page: say what it is, then check.

Departure procedures

In test mode the answers are hidden. Click or tap a card to reveal it.

Reading material